Fiddes and Sons Wax

Fiddes and Sons Wax
Click To Enlarge
  • Item #: 273
  * Marked fields are required.
Qty*
Price $18.95

Our first choice in finishing our chalk painted creations is

We tried every soft paste wax on the market and Fiddes was the perfect fit for our needs. As thrifty, environmentally conscientious  and practicality minded painters, Fiddes was just what we were looking for. We found it to have so many positive attributes that we just had “hold hands”.

  • Dries harder and faster!

  • Only stinks a little. They claim it’s odorless but I can smell a slight aroma of honey (beeswax) and some smell vanilla.

  • Affordable! Won’t break our budget on the wax and a little goes a LONG way, especially with the dark colors!

  • Available! No long, extended wait to get the wax. Available nationwide or from our website….you’ll have it in 4 days or less!

  • Can be used on bare or painted surfaces!

  • Can be applied with a rag or a brush, no special tools needed.

  • We make ours last longer and extend “play time” by sitting it in the sun and melting it first….no waste from “chunks” dropping onto the floor.

  • Toluene FREE!

 

SUPREME WAX POLISH 

• Toluene Free 

• Quick Drying 

• Low Aromatic 

• Excellent Results On Bare Or Sealed Wood 

• 7 Consistent Colour Shades 

• Hand Or Spray Apply 

Formulated to offer excellent results on bare or sealed wood, Fiddes Supreme Wax Polish contains a unique, environmentally friendly blend of waxes that naturally enhances the beauty of your wood. 

Available in seven carefully selected shades, the Supreme Wax range exhibits significant advantages over many traditional toluene based wax polishes. Supreme Wax is virtually odour free, easy to apply, and once buffed to the desired sheen level, provides a depth of finish that revives and protects any original patina. 

Preparation 

Sand the wooden substrate in stages, working with a medium sandpaper (120 grit), through to a medium / fine grade (180 –220 grit). Always sand in the direction of the grain pattern where possible, ensuring the removal of any blemishes and glue residue prior to the application of Fiddes Supreme Wax. Take care to remove all traces of sanding dust and test the chosen Fiddes Supreme Wax shade on a similar substrate to verify the color. A coat of Fiddes Shellac Sealer is recommended on open grained woods prior to application. 

Application 

Take a clean cotton cloth, sponge or brush and apply in the direction of the wood grain where possible. To obtain a uniform colour, always wipe evenly, blending the Supreme Wax over the whole surface area by exerting a small degree of pressure when applying by hand. Take care to lightly remove any excess Supreme Wax immediately with a separate, clean absorbent cloth, again following the direction of the grain pattern. 

Leave to dry for around 3 minutes, and buff to finish with a soft cloth. 

The application of additional coats will deepen the existing color / shade and significantly enhance the resulting sheen level. 

• Application: 
Cloth, Brush, Sponge. 
• Dry Time:
 3 minutes at room temperature. 
• Coverage: 
16 sqm per Litre (depending on substrate and method of application) 
• Coats: 
1 coat – further coats will deepen color / shade and enhance sheen level 
• Thinners: 
NGR Thinners / Methylated Spirits. 
• Recommended for use on: 
Fine Furniture, Doors, Floors, Cabinet Work and Panelling. 
• Packaging: 
500ml –5lt – 20lt containers. 


Supreme is available in seven separate shades and Clear.

 

Reviews (0) Write a Review
No Reviews. Write a Review